This is a CEL-FI GO CELLMATE V2 – PORTABLE MOBILE REPEATER - TELSTRA of brand Cel-Fi.

SALIN is a leading Australian appliance spare parts distributer . We take pride in our ability to bring hard to find appliance spare parts into the Australian market. We are proudly Australian owned and operated. Our warehouse and sales office is conveniently located in Auburn, NSW. Our range of spare parts are manufactured with premium components and quality material. Most of our range is directly sourced from manufacturers and geniune.  

TECHNICAL SHEET
Title CEL-FI GO CELLMATE V2 – PORTABLE MOBILE REPEATER - TELSTRA
Notes TELSTRA GO 3G (850) OR 4G (700/1800) – SINGLE BAND The Cel-Fi Cellmate for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your car, 4WD, or truck and for emergency services, being transported between fleet vehicles, construction or mining sites. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. Cellmate features a Cel-Fi GO, power supply and battery backup in a Pelican Case 1400 which is IP67 Watertight, crushproof and dustproof. Coupled with antennas (sold separately) and the Cel-Fi WAVE smartphone app, Cellmate is the ideal solution to resolve coverage challenges, in the harshest environmentsIdeal for emergency services, being transported between fleet vehicles, construction or mining sites. The Cellmate includes a Cel-Fi Mobile repeater that can boost a 3G or 4G mobile signal on the Telstra, Optus and Vodafone network.Cel-Fi Cellmate for repeating Telstra GO 3G (850) or 4G (700/1800)Select manual or auto, to boost 3G or 4G (only one band at a time)Pelican Case 1400 - IP67 Watertight, crushproof, and dustproof – 340x295x152mm240 Mains Power Supply & 12V Vehicle accessory Lighter power supply inbuilt chargerTruly portable solution with inbuilt battery – supplies power for up to 10 hoursBluetooth Cel-Fi WAVE App control. Reception level, boost level, 3G or 4G mode.Internal transmit antenna in the base of the case 5dBi thin panel type antennaExternal SMA/F Antenna port for connection to a high gain reception antenna External antenna, mount and cabling are sold separatelyPowering Cellmate The system can be powered from: • Mains Power - using the included 240v Battery LED’s adaptor • DC Power - using the included 12v cigarette plug adaptor • Internal Battery - providing power for 6 to 10 hours Charging the Internal Battery • Connect a 12V cigarette adaptor or 240V mains power supply to the ‘power port’ on the Cellmate, charging will start. Connect External Antenna • To received a mobile signal an external antenna that supports your carriers specific cellular bands must be connected to the antenna port.• The external antenna, mount and cable is not included with the Cellmate. • We offer a range of Blackhawk antennas that have been tested with Cellmate. Optimising the Antennas Cellmate includes an embedded ‘service antenna’ built into the base of the case. The lid of the case features an RF shield to assist with isolation. Antenna Isolation is Important: For Cellmate to work at optimal boost you need to separate/isolate the inbuilt ‘service antenna’ from the external antenna as much as possible. If the external antenna picks the signal that is disbursed from the inbuilt coverage antenna, then the boost and signal coverage area will be reduced. Download Cel-Fi WAVE App Cel-Fi WAVE is an App on your smart phone that enables you optimise the antenna setup:• Check the input signal level from the network • Check the ‘Boost’ figure (6-9 is ideal) • Change mode or use the Mode Switch on the Cel-Fi GO • 3G -will boost a 3G signal, • 4G/4GX -will boost a 4G signal •Auto -will boost the strongest 3G or 4G signal Note: Telstra/Optus units will only boost one band at a time  Note: Vodaphone unit will not boost regional (Vodaphone shares carriers) Note: An external high-gain reception antenna, mount and cable is required to be added to this pack.
DescriptionCel-Fi GO Cellmate V2 - Portable Mobile Repeater IP67 Telstra Cel-Fi GO Cellmate V2 - Portable Mobile Repeater IP67 Telstra
NetworkTelstra
TypePortable Kit
Description ExtendedThe Cellmate for Telstra features a Cel-Fi GO, power supply and battery backup in a IP67 rugged pelican case. Suitable for boosting and distributing a 3G/4G mobile signal within your car or transport to a remote work site. Ideal for emergency services, being transported between fleet vehicles, construction or mining sites.
Feature100dB of system gain (latest software update required using WAVE App) Includes external and internal antennas Up to 900m2 of coverage Band Selection Button Bluetooth WAVE App for iPhone, Android & Computers Designed for caravan applications 100dB of system gain (latest software update required using WAVE App) Includes external and internal antennas Locked to Telstra’s Mobile Network Carrier approved
CertificationCel-Fi Go Cellmate V2 has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network
Band3G/4G
Frequency850MHz or 700/1800MHz
InRequired*
LeadRequired
OutBuilt-In to case
Power240Vac / 12Vdc
ManufacturerCel-Fi
Device TypePortable Kit
SKU NoWES_RPR-CF-00538_2

 

SALIN is not responsible for any possible damage caused by misselection and incorrect installation of the spare parts.

All electrical items must be fitted by a qualified electrician.

Errors and Omissions Excepted:

All information contained herein this website is assumed to be accurate, however, no responsibility is assumed by SALIN  for its use, nor for any infringements of patents or other rights of third parties which may result from its use.

Legal Disclaimer:

All trademarks, logos and principal representations remain the property of their respective owners. The use of brands, brand names and trademarks doesn't imply SALIN is representing those brands, companies, trademarks or names. SALIN holds no rights to products and/or services available or provided by the said companies, brands, brand names and trademarks.

MPN
SKU WES_RPR-CF-00538_2
Brand Cel-Fi